贴在平坦表面预应力压电陶瓷执行器驱动位移性能改变.pdfVIP

Home Search Collections Journals About Contact us My IOPscience Actuation displacement performance change of pre-stressed piezoelectric actuators attached to a flat surface This article has been downloaded from IOPscience. Please scroll down to see the full text article. 2009 Smart Mater. Struct. 18 037003 (/0964-1726/18/3/037003) View the table of contents for this issue, or go to the journal homepage for more Download details: IP Address: 8 The article was downloaded on 03/03/2011 at 06:44 Please note that terms and conditions apply. IOP PUBLISHING SMART MATERIALS AND STRUCTURES Smart Mater. Struct. 18 (2009) 037003 (5pp) doi:10.1088/0964-1726/18/3/037003 TECHNICAL NOTE Actuation displacement performance change of pre-stressed piezoelectric actuators attached to a flat surface Nam Seo Goo, Van Phuoc Phan and Hoon Cheol Park Biomimetics and Intelligent Microsystem Laboratory, Department of Advanced Technology Fusion, Artificial Muscle Research Center, Konkuk University, 1 Hwayang-dong, Gwangjin-gu, Seoul 143-701, Republic of Korea E-mail: nsgoo@konkuk.ac.kr Received 23 August 2008, in final form 2 January 2009 Published 10 February 2009 Online at /SMS/18/037003 Abstract Pre-stressed piezoelectric actuators such as RAINBOW, THUNDER™, and LIPCA have a curvature due to a mismatch of the coefficient of thermal expansion, which inevitably exists during the manufacturing process. This technical note provides an answer to the question of how their actuation displacement performance changes when the curved pre-stressed piezoelectric actuators are attached to a flat surface. Finite element analysis with the ANSYS™ program was used to calculate the stress distribution inside a LIPCA, one