毕业设计论文;能温度控制器.docVIP

内蒙古科技大学 本科生毕业设计说明书（毕业论文） 题 目：智能温度控制器 智能温度控制器 摘 要 关键词：Smart Temperature Controller Abstract The temperature controller for use wisdom and A Single Chip computer and FPGA/CPLD combined constitute the main system of monitoring. FPGA/CPLD primarily responsible for data collection, data storage, keyboard scanning, data; Shanpianji FPGA/CPLD primarily responsible for the retrieval of data collection, and on the basis of these data recovery figures, with their degrees, PID operations. This design system can be divided into four basic components : temperature data acquisition circuits, data processing control circuits, data circuits and warning circuits. 1. Temperature data collection : The main application for K-type thermocouple temperature sensors collecting temperature signal. ADC0809 will use standard analog signal conversion into digital signals. Integrated temperature sensor measurements using cold-AD590 temperature, the cold-temperature compensation. 2. Data processing control components : data collection will be processed by computer, digital filtering, scales used, PID control parameters export operations, the use of silicon-controlled rectifier principles of a single-phase electric heater temperature control. Temperature control circuits used Jingzhaguan transfer credit. 3. Data elements : the show circuit anode part of a total of four digital and four pieces of eight and a one string into the 74LS164 chip. 4. Police parts : an emergency warning system to alert operators of attention, or take emergency measures. The methods of collecting data is the computer with the parameters of the maximum and minimum levels of value to be compared : if more than or less than the limits of the limits to the police, or as a sampling of the normal value, display and control. Key words: Intelligent; Temperature control; A Single Chip Computer ; FPGA/CPLD目 录 摘 要 I Abstract II 第一章 引 言 1 1.1 课题的意义 1 1.2 智能温度控制器的功能 2 第二章 硬件设计 4 2.1 智能温度控制器原理框图 4 2.