BT40×24型斗竖式刀库的研究和设计_外文翻译.doc

武汉工业学院 毕业设计（论文）外文参考文献译文本 2013届 译文出处M.B.Ko.Design of automatic tool changer for CNC machines.M.Scthesis,Mechanical EngineeringDepartmet, METU, Ankara, Turkey 1995 毕业设计(论文)题目 BT40×24型斗竖式刀库研究与设 计 院（系） 机械工程学院 专业名称 机械设计制造及其自动化 学生姓名 xxxxxxxxx 学生学号 090309815 指导教师 刘 海 岷 译文出处： M.B.Ko.Design of automatic tool changer for CNC machines.M.Scthesis,Mechanical EngineeringDepartmet, METU, Ankara, Turkey 1995 翻译文献：Time between failures model and failure analysis of CNC system [J]．.Joumal 2007，14(2)：197-201ZHANG H　B，JIA Y Z，ZHOU G W． 英语原文： The original knife machine control procedures are designed individually, not used tool management system, features a single comparison, the knife only has to fin the tool knife, knife positioning the shortest path, axis tool change, but does not support large-scale tool.  Automatic knife in the knife election, in the computer memory knife-election on the basis of using the Siemens 840 D features, and the election procedures knife more concise, and complete the space Daotao View. ATC use the knife rapid completion of STEP-7 programming, and have been tested in practice. In the positioning of the knife, PLC controlled modular design method, which future production of similar machines will be very beneficial, it is easy to use its other machine. Automatic tool change systems will be faster growth, reduced tool change time, increase the positioning accuracy tool is an important means to help NC technology development.  Tool and inventory components of modern production is an important link in the management, especially for large workshop D features, and the election procedures knife more concise, and complete the space Daotao View. ATC use the knife rapid completion of STEP-7 programming, and have been tested in practice. In the positioning of the knife, PLC controlled modular design method, which future production of similar machines w