单边带信号滤波器_课程设计.doc

课程设计任务书 学生姓名： 专业班级：指导教师：工作单位： 题 目: 初始条件： Multisim软件进行电路设计及仿真分析 要求完成的主要任务:（包括课程设计工作量及技术要求，说明书撰写等具体要求） Multisim仿真，能够观察输入输出波形。 2）熟悉Multisim仿真操作系统，及高频电子线路课程 3）按照要求设计电路，计算电路的参数，完成课程设计。 3、查阅至少5篇参考文献。按《武汉理工大学课程设计工作规范》要求撰写设计报告书。全文用A4纸打印，图纸应符合绘图规范。 时间安排： 号 阶段内容 所需时间 1 方案设计 1天 2 软件设计 2天 3 系统调试 1天 4 答辩 1天 合 计 5天 指导教师签名： 年 月 日 系主任（或责任教师）签名： 年 月 日 目录 摘要 3 Abstract 4 1.滤波器 5 1.1滤波器的简介 5 1.2模拟滤波器理论 6 1.3 数字滤波器的基本概念 7 1.3.1 低通滤波器 8 1.3.2 高通滤波器 8 1.3.3 带通滤波器 8 1.3.4 带阻滤波器 9 2.单边带信号 10 2.2单边带信号产生原理及时域、频域分析 12 2.3产生单边带信号的整体电路图 14 3.单边带信号滤波器的设计 17 4.multisim软件简介 18 5.电路仿真结果 19 小结与体会 22 7.参考文献 24 Transmit information is one of the important contents of human life. Using radio technology information transmission in these means plays an important role. The radio communication, radio, TV, navigation, radar, remote telemetry etc, it is using radio technology spread various information way. Radio transmission voice, point or other signal;? Radio transmission language, music, etc.; TV transmission of pictures, language, music, Navigation is to use certain radio signal guide aircraft or the ship safe voyage to enable them to safe arrival destination; Radar is to use a radio signal reflection to determine certain goals such as plane, shipping, etc. azimuth, Telemetry remote control is to use radio technology to measure the distance or exercise body on some parameters, control the distant parts of the operation, etc. In all these information transfer process, the frequency modulated signal not high load the high frequency carrier, and then the signal transfer. In the information of the receiver need the useful signal from the mixed signal demodulation already tuning in come out. Because of using SSB amplitude can improve the utilization rate of channel, so choose SSB modulation and demodulation as I of the curriculum design of subject of great practical significance. Bilateral upper and lower with modulation two sideband is completely symmetrical, they carry informatio