USB3.0-GPIB控制器设计.pdfVIP

万方数据 Subject : The Design of The USB3.0-GPIB Controller Specialty : Microelectronics and solid state electronics Name : Yang Cuicui (Signature): Instructor : Zhu Xiangdong (Signature): ABSTRACT GPIB is a kind of widely used General-Purpose Interface Bus in electronic measuring instrument , it has a parallel bus transfer speed, driving ability strong, effective data rate is high, big communication distance, good anti-jamming performance and general characteristics of use ,etc.Using its electronic measuring instrument and computing units can be built a set of modular, modular automatic test system. The automatic test system based on GPIB bus to be formed, the core is the GPIB control machine. Realize GPIB control machine is the simplest method is to connect a GPIB controller on the computer, and GPIB controller must have can directly connected with the computer interface.This topic for the GPIB controller board who Based on the traditional interface bus ( such as RS232-GPIB, PCI-GPIB, ISA-GPIB, etc.),installation of trouble, not suitable for mobile measurement, expensive, restricted by computer slot number, address and interrupt resources and poor scalability problems, and will start new USB3.0 technology into the design of GPIB controler boards, GPIB controller board has added more advantages. This topic’s main work consists of three parts: the first part is responsible for the entire USB3.0 -GPIB controller board’s hardware principle diagram design and implementation of GPIB controller interface card. The GPIB card hardware mainly includes