- 12
- 0
- 约2.17万字
- 约 42页
- 2015-12-10 发布于辽宁
- 举报
基于51单片机的水质检测系统设计
[摘要]
本系统是基于低功耗的AT89S51单片机,通过Ne555定时器构成的多谐振荡器产生一定频率的波,再通过单片机的I/O接口对捕获高低电平的读出频率,然后通过程序算法处理抽换算成电阻的值,使用DS18B20作为温度采集模块,用RS485实现远距离传送。经过主机的数据转换和处理,将温度值通过字符液晶1602显示器显示。本设计结构简单,使用灵活,具有很大的使用和研究价值。
[关键字]
水质监测仪 NE555定时器 温度采集 RS485通信
[ Abstract ]
The system is based on low power consumption AT89S51 MCU, through the Ne555timer multivibrator generates a certain frequency of the wave, and then through the MCU I / O interface to capture level read frequency, and then through the program algorithm is converted into the pumping resistance value, use DS18B20 as
原创力文档

文档评论(0)