液压与气压传动英汉双语 陈淑梅第10章 Chapter_10 新.pptVIP

Chapter 10 Air Supply Devices and  Pneumatic Components A pneumatic system incorporates the following components and devices: (1)Air supply devices: (2) Actuators (3)Control elements (4)Pneumatic attachments 10.1 Air Supply Devices 10.2 Pneumatic Attachments 10.3 Pneumatic Actuators 10.4 Regulating Valves 10.1 Air Supply Devices Air supply devices are used to provide compressed air (with a certain lever of pressure, flow rate and purification) for pneumatic systems. An air supply device incorporates four parts: (1) pressure generation devices; (2) air regeneration (3) storing devices; (4) air lines and F.R.L combination. Fig. 10-1 Schematic view of air supply system 10.1.1 Pressure generation devices 1. Compressor classification Fig. 10-2 Basic compressor type 2. Working principles of compressors 10.1.2 Purification and storing devices and equipments compressed air Demands for better quality of compressed air Fig. 10-5 Strike and return with ring revolving type moisture separator Fig. 10-6 Receiver Fig.10-7 Heatless regeneration dryer 10.1.3 F.R.L Combination 1. Air filter (2)Performance 4)Flow rate characteristics: the difference of input and output pressures must be less than 5% at a rating flow rate. 2. Oil mist lubricator (1)Operation and construction (2)Main performance and indices （2）Main performance 1) Pressure characteristics: describes the fluctuation of output pressure p2 with the input pressure p1 under a given output flow rate q. Fig.11-13a) shows its characteristic curves. 2)Flow rate characteristics: describes the fluctuation of the output pressure p2 with output flow rate q under a given input pressure p1. Fig.11-13b) shows its characteristic curves. a)Pressure characteristics b)Flow rate characteristics Fig.10-13Performance curves of pneumatic pressure reducing valves 10.2 Pneumatic Attachments 10.2.1 Mufflers 10.2 Pneumatic Attach