《NN1-05D12S DCDC电源模块》.doc

■ Typical performance/典型性能 特点：定电压输入，隔离非稳压输出，1W功率 Characteristics:Fixed Input,isolation, Unregulated Output,1W 隔离电压 Isolation voltage：1000VDC/3000VDC 效率Efficiency ：高达(up to) 80% 工作环境温度 Working temperature ：-40～+85 ◎ MTBF≥350万小时(3500000Hrs) 符合RoHS指令 In line with RoHS codes 线性调节率 (输入电压变化±1%时)±1.2% Line regulation (once input change ±1%) ±1.2% 负载调节率(10%-100%满载) 15% Load regulation (10%-100% full load) 15% 纹波/噪声(20MHz带宽)＜75mVp-p Ripple and noise (20MHz Band width) 75mVp-p ■ Typical product tabulates / 典型产品列表 ■ Mechanical Data / 封装尺寸表 封装代号Package Code L × W × H L × W × H A (单路输出 single output) 11.50 × 6.00 × 10.00mm 0.45 × 0.24 × 0.39inch B (单路输出 single output) 19.50 × 6.00 × 10.00mm 0.77 × 0.24 × 0.39inch C ( 两路正负输出 dual output ) 19.50 × 6.00 × 10.00mm 0.77 × 0.24 × 0.39inch D( 两路隔离输出 dual output isolated ) 19.50 × 6.00 × 10.00mm 0.77 × 0.24 × 0.39inch E( 单路输出3000VDC隔离 single output 3000VDC isolated) 19.50 × 6.00 × 10.00mm 0.77 × 0.24 × 0.39inch F( 两路正负输出3000VDC隔离 dual output 3000VDC isolated) 19.50 × 6.00 × 10.00mm 0.77 × 0.24 × 0.39inch ?■ Dimensional Drawing/ 封装尺寸图 ?■ 封装尺寸A：单路输出 (single route output)SIP 管脚代码 1 2 3 4 5 6 7 功能(Usage) GND Vin -Vo +Vo ? ? ? ▲注：所有单位尺寸为mm，所有相邻端子间距为2.54mm，所有端子直径为0.65mm▲Note:Aaa unit is mm,all neighboring pin distance is 2.54mm,all ping diameter is 0.65mm. ??????????????? ■ 封装尺寸B：单路输出 (single route output)SIP 管脚代码 1 2 3 4 5 6 7 功能(Usage) Vin GND ? -Vo ? +Vo ? ▲注：所有单位尺寸为mm，所有相邻端子间距为2.54mm，所有端子直径为0.65mm▲Note:Aaa unit is mm,all neighboring pin distance is 2.54mm,all ping diameter is 0.65mm. ■ 封装尺寸C：正负两路输出 (Duel route Positlve and negative out)SIP 管脚代码 1 2 3 4 5 6 7 功能(Usage) Vin GND ? -Vo COM +Vo ? ▲注：所有单位尺寸为mm，所有相邻端子间距为2.54mm，所有端子直径为0.65mm▲Note:Aaa unit is mm,all neighboring pin distance is 2.54mm,all ping diameter is 0.65mm. ? ■ 封装尺寸D：两路隔离输出 (Duel route isolation output)SIP 管脚代码 1 2 3 4 5 6 7 功能(Usage) Vin GND ? -Vo1 +Vo1 -Vo2 +Vo2 ▲注：所有单位尺寸为mm，所有相邻端子间距为2.54mm，所有端子直径为0.65mm▲Note:Aaa unit is mm,all neighboring