Appendix-VI.docVIP

Appendix- VI Procedure for calculation of Transmission System Availability Transmission System Availability shall be certified by Member Secretary, RPC of the region concerned separately for each AC and HVDC Transmission System for which transmission charge is payable by a particular long-term transmission customer or is shared by same set of long-term transmission customers. The transmission elements shall be grouped into following categories for the purpose of calculation of availability of Transmission Systems : AC transmission lines: Each circuit of AC transmission line shall be considered as one element. Inter-Connecting Transformers (ICTs): Each ICT bank (three single phase transformer together) shall form one element. Static VAR Compensator (SVC): SVC along with SVC transformer shall form one element. However, 50% credit to inductive and 50% to capacitive rating shall be given. Switched Bus Reactor: Each switched Bus Reactor shall be considered as one element. HVDC Bi-pole links: Each pole of HVDC link along with associated equipment at both ends shall be considered as one element. HVDC back-to-back station: Each block of HVDC back-to-back station shall be considered as one element. If associated AC line (necessary for transfer of inter-regional power through HVDC back-to-back station) is not available, the HVDC back-to-back station block shall also be considered as unavailable. The Availability of AC and HVDC portion of Transmission system shall be calculated as under: % System Availability for AC system o X AVo + p X AVp + q X AVq + r X AVr = ------------------------------------------------------------ X 100 o + p + q + r % System Availability for HVDC system s X AVs + t X AVt = ---------------------------------- X 100 s + t Where o is Total number of AC lines. AVo is Availability of o number of AC lines. p is Total number of switched bus reactors . AVp is Availability of p number of