模具专业英语 王浩钢 14456第11章新.pptVIP

Lesson 11 Ejection 　　A molding is formed in mould by injecting a plastic melt, under pressure, into an impression via a feed system. It must therefore be removed manually. 　　Furthermore, all thermoplastic materials contract as they solidify, which means that the molding will shrink on to the core which forms it①. This shrinkage makes the molding difficult to remove. 　　Facilities are provided on the injection machine for automatic actuation of an ejector system, and this is situated behind the moving platen. 　　Because of this, the mould’s ejector system will be most effectively opera