GQ钢筋切断机的主传动机构设计和运动仿真说明书.doc

毕业设计说明书 GQ50型钢筋切断机的主传动机构的设计与运动仿真 院系名称 专业名称 学生姓名 指导教师 2014年 月 日  GQ50型钢筋切断机的主传动机构的设计与运动仿真 摘要 随着当代建筑业的发展，建筑机械也随之得到了发展。本文主要是对建筑机械中的钢筋切断机进行研究。本设计是在对生产车间的GQ50型钢筋切断机的工作实况进行参观的前提下，通过从图书馆和网络对切断机的相关知识进行了解掌握，把握GQ50钢筋切断机的结构与工作原理。并在此基础上进一步形成自己的设计思路、设计方法。 本设计是根据钢筋切断机的使用要求的基础上进行主传动机构的设计。主要是从电动机的选择、传动装置的设计和计算、轴承的选择、曲轴连杆机构的设计、机体设计、刀片的设计选择等方面入手进行结构设计，然后再根据所设计的数据进行建模和运动仿真。本设计是采用美国Autodesk公司的三维设计软件Invertor 2011根据设计数据建立三维实体模型、装配，再进行应力分析、运动干涉分析和运动仿真。 本设计的钢筋切断机在研发周期及成本方面有了很大的提高，为以后的市场竞争与推广提供了条件。 关键词：钢筋切断机，结构设计，Inventor 2011，装配，运动仿真  Abstract With the development of the construction industry, construction machinery has been developed. This paper is a study of steel cutting machine. The design is in GQ50 steel on the production workshop cutter working live tour under the premise, the related knowledge to understand the cutting machine from library and Internet, grasp the structure and working principle of GQ50 steel cutting machine. And on this basis, to creat a new design idea and a new design method. This design is the structural design according to the basic requirements of steel cutting machine. Mainly from the choice of motor, gear design and calculation, bearing selection, the crankshaft and connecting rod mechanism design, body design, blade design selection and other aspects of structure design, and then according to the design of the data modeling and movement simulation. This design use Invertor 2011 according to the design data to establish the three-dimensional solid model, then make a interference analysis and a motion simulation of force analysis. The design of the steel cutting machine has been greatly improved in the aspects of the development cycle and cost and it provided the conditions for the market competition and promotion in the future. Keywords: steel cutting machine, the structure design, Inventor 2011, assembling, movement simulation 目 录 1 绪论 1 2 设计依据 3 2.1 GQ50型钢筋切断机的规格参数 3 2.2 资料准备 3 2.3 Inventor 2011软件的了解及学习 3 3 GQ50型钢筋切断机的简介 5 3.1工作原理 5 3.2