mtk入门导读培训.pdfVIP

MTK 入门导读 作者：韩宇 时间：2005-6-30 文档内容： －》MTK 软件架构 －》如何编译 －》开发目录结构解析 －》开发工具的了解 －》程序入口，程序导读 －》MMI 的制作 1．MTK 软件构架 参考文档：MT6218_SW_ReleaseNote.pdf MTK为MediaTek公司提供的GSM软件方案。它包含5个部分： －》L1协议 －》设备驱动 －》协议栈 －》MMI －》WAP应用 MediaTek为用户提供3个工具： －》Catcher －》META －》MCT MTK软件架构图： 下面3个部分组成该软件方案： 1. MS Executable Software, which is the software running on the MS, includes the following modules - OS: Nucleus OS. - L1 Protocol Stack: GSM physical layer. - Drivers: device driver, like SIM, UART, GPIO, etc. - L2/L3 protocol stack: GSM protocol stack layer. - MMI: man-machine interface. - WAP: Wireless application protocol. - JAVA: J2ME Software 2. The Mobile Engineering Testing Architecture, also known as META 3. Catcher －》OS MediaTek采用Nucleus OS实时操作系统。KAL OS层为MediaTek’s软件和Nucleus操作系统 的接口。它为任务提供许多系统服务函数，比如计时器，队列，内存管理，事件等等。 －》L1 Protocol Stack The physical layer or Layer 1 supports the transfer of bit streams on the radio medium according to the Technical Specifications of the 05-series. It provides service to upper layers and control the mapping and scheduling between the logical and physical channels. The TDMA framing and radio control parts are also implemented. Layer 1 Asynchronous: handles the message request from upper layers and forward the result generated by layer 1 to upper layer. Surrounding Cell Engine: handles the neighbor cell power measurement and neighbor cell synchronization information acquisition. Layer 1 Control: handles the TDMA scheduling on the radio environment, including timing advance and power control command from serving base station. Layer 1 Driver: handles the DSP and Radio control －》Drivers MCU外围设备的驱动，如下： SIM: Subscriber Identity Module UART: Unive