刮板输送机减速器非接触在线监测系统的研究.pdfVIP

Subject : Research on the Non-contacting Online Monitoring System of Scraper Transporter Decelerator Specialty :Mechatronic Engineering Name :Zhang Jie (Signature) Instructor :Ma Hongwei (Signature) ABSTRACT Aiming at the status of low degree of automation, poor real-time of scraper conveyor decelerator monitoring system, a new method of scraper conveyor decelerator online monitoring is proposed, and developed a monitoring system, realized the online monitoring of high and low speed of scraper conveyor decelerator shaft temperature, oil temperature and oil level of both the big and small oil tanks. Hardware part of monitoring system is consisted of signal acquisition module, single-chip microcomputer control module, data transmission and upper desk module. The ultrasonic sensor is used to collect the oil level signal of both the big and small oil tanks through non-contacting way. Infrared temperature sensor is used to collect the tempera ture of big and small oil tanks, high and low speed shaft through non-contact signal acquisition method. Main control chip are consisted of ATmega 8 and its peripheral circuit to realize the control of all signal acquisition modules. The serial part communication between lower computer and upper computer of data transmission module is realized by RS232. Software part of monitoring system is developed by ICCAVR compiler, which is designed specifically for AVR microcontroller. Data acquisition and data processing program are designed according to the communication protocol.Upper computer monitoring interface was designed by VC++