SPESstrategy.pptVIP

SPES Develop a Neutron Rich ISOL facility delivering Radioactive Ion Beams at 10AMeV using the LNL linear accelerator ALPI as re-accelerator . Make use of a Direct ISOL Target based on UCx and able to reach 1013 Fission/s to produce neutron rich exotic beams. Apply the technology and the components of the ISOL facility to develop applications in neutron production and medicine. a b d g Exotic nuclei ISOL facility for Neutron rich nuclei by U fission 1013 f/s high purity beam Reacceleration up to 10 MeV/u Applications Proton and neutron facility for applied physiscs Radioisotope produduction Medical applications SPES strategy Spes Project Layout * LAC Piazza * Artistic View RadioIsotopes Facility ISOL Facility SPES facility at LNL Proton Driver ISOL target 1 (8kW) ISOL target 2 High Resolution Mass Spectrometer Charge Breeder Exotic beam transfer to PIAVE-ALPI Proton and neutron applications HV platform 260kV Beam Cooler The SPES Front end Proton Beam Radioactive Beam Target ion-source system The SPES FE is fully operative! 60 kV platform Beam diagnostic devices Steerer Electric quads Target Ion source (platform 30kV) Proton beam line 60 kV insulator The SPES target prototype Graphite Window UCx Disk Graphite Dumpers Graphite Box UCx emissivity measurement SEM Characterization UCx target production Before thermal treatment After thermal carburization treatment 4 cm diameter, 1 mm thick pellets SPES Target-Ion-Source SPES Surface Ion Source 350 A Bending angle 80° in/out 28° Drift 1.62 m Quads. Elett. Leff=40 cm R=30 mm, Vmax3 kV Beam transport Spectrometer Wien filter Beam cooler HRMS Charge Breeder ISOL target Beam switching 90o Deflector Electrostatic deflector for HV ripple compensation Radio-isotopes for medicine LARAMED project Production of radionuclides of interest for medicine using the SPES cyclotron New radio-isotopes of interest for medicine available at 70 MeV ARRONAX – SPES collaboration for Isotopes production and