StainlessSteelPipeandFittings-FTPDirectoryListing.docVIP

SECTION 15065 STAINLESS STEEL PIPE AND FITTINGS GENERAL DESCRIPTION Scope: This section specifies stainless steel pipe and fittings. Types of Service: Stainless steel piping specified in this Section shall be used for raw sewage discharge piping in the pump station wetwell. QUALITY ASSURANCE References: This Section contains references to the following documents. They are a part of this Section as specified and modified. Where a referenced document contains references to other standards, those documents are included as references under this Section as if referenced directly. In the event of conflict between the requirements of this Section and those of the listed documents, the requirements of this Section shall prevail. Reference Title ANSI B16.1 Cast Iron Pipe Flanges and Flanged Fittings Classes 25, 125, 250, and 800 ANSI B16.11.80 Forged Steel Fittings, Socket Welding and Threaded ANSI B31.1 Power Piping ANSI B36.19M Stainless Steel Pipe ASME Section IX (1989) Boiler and Pressure Vessel Code; Welding and Brazing Qualifications ASTM A182/A182M Forged or Rolled Alloy-Steel Pipe Flanges, Forged Fittings, and Valves and Parts for High Temperature Service ASTM A193/A193M Alloy-Steel and Stainless Steel Bolting Materials for High Temperature Service ASTM A194/A194M Carbon and Alloy Steel Nuts for Bolts for High Pressure and High Temperature Service ASTM A240 Heat-Resisting Chromium and Chromium Nickel Stainless Steel Plate, Sheet, and Strip for Pressure Vessels ASTM A276 Stainless and Heat-Resisting Steel Bars and Shapes ASTM A312/A312M Seamless and Welded Austenitic Stainless Steel Pipes ASTM A320/A320M Alloy Steel Bolting Materials for Low Temperature Service ASTM A403/A403M Wrought Austenitic Stainless Steel Piping Fittings ASTM A409/A409M Welded Large Diameter Austenitic Steel Pipe for Corrosive or High Temperature Service ASTM A480/A480M General Requirements for Flat-Rolled Stainless and Heat- Resisting Steel Plate, Sheet and Strip ASTM A774/A774M