TheSimulationofCuttingForceand-ThirdWaveSystems.PDFVIP

The Simulation of Cutting Force and Temperature Field in Turning of Inconel 718 1 1 1 1 1 2 Yang Zhenchao , Zhang Dinghua , Huang Xinchun , Yao Changfeng , Liang Yongshou , Mao Ying 1 Key Lab of Contemporary Design and Integrated Manufacturing Technology, Ministry of Education, Northwestern Polytechnical University, Xi’an, China 2 Osin Technology Corporation, Bei Jing，China yang966122@126.com Abstract: Finite element method (FEM) is a powerful tool to However, machining of Inconel 718 remained a difficult predict cutting process variables such as temperature field problem. which are difficult to be obtained from experimental methods. Improper selection of cutting parameters such as cutting The turning process of Inconel 718 is simulated by speed, feed, and cutting depth in turning of Inconel 7 18 may AdvantEdge which is professional metal-cutting processing cause cutting tools to wear quickly and even to break, which finite element software. The effects of cutting speed, feed and leads to the poor surface quality and anti-fatigue performance cutting depth on cutting force and temperature field are of Inconel 7 18. This paper builds a finite element model for analyzed. The results show that cutting forces decrease with the turning of Inconel 718 using the commercial general cutting speed increasing, and incre