VSI5XSandMakingMachine.docVIP

Product Brief Introduction: MTW European Trapezium Mill is the newest grinding equipment which enjoys many patented technology and reaches the international advanced level. It is the up-to-date grinding equipment designed by our devoted research team, basing on feedbacks and advice from 9518 mill customers and rich experience on mill research. The mill enjoys several patent technologies, such as bevel gear overall drive, inner automatic Thin-Oil lubricating system, arc air channel, etc. Highlights: (1) Bevel gear integral transmission: The traditional mill needs an additional speed reducer and the main shaft is driven through a coupling. In addition, the alignment is hard to handle during installation, and noise will be generated and the efficiency is low. The MTV series European technology trapezium mill adopts the integral bevel gear integral driving, which makes the structure more compact, installation and adjustment more convenient and quicker, and the efficiency increased greatly. (2) Internal thin oil lubrication system: The traditional mill is generally lubricated with grease. In that case, the lubrication resistance is large, and the temperature rises high and the service life is short. The MTV series European technology trapezium mill adopts the internal oil pump, it is not necessary to add an additional oil pump or lubrication station to lubricate the bearing of the main shaft and the bevel gear shaft. (3) Arc air duct: The air duct of a traditional mill is of straight panel type. In such structure, resistance force may be generated when the air impacts the air duct panel. And the energy loss is large due to the crashing between airflow molecules, thus the air duct may be subject to jamming because of vortexes. The MTV series European technology trapezium mill adopts the curve surface air duct, and the inlet for tangential airflow is smooth, so the resistance is very small. The internal outlet direction is good for scattering the material and blocking is a