Whatispartsmapping.pptVIP

Worm gear shaft Bevel gear shaft 8. Create detail drawings * * 零件的测绘就是依据实际零件画出它的图形，测量出它的尺寸和制定出它的技术要求。测绘时，首先画出零件草图，然后根据零件草图画出零件图，为设计机器、修配零件和准备配件创造条件 Part measurement is the technique to draw a part’s profile, measure its dimensions and compile its technical requirement based on the real part. When measuring, drawing the sketch of the part should be the first step, followed by constructing part drawing from the sketch. Thus the conditions for the tasks like designing machines, adjusting parts and preparing accessories is warranted * 、了解零件图的内容、要求及其在生产中  的作用。2、掌握画草图的方法、步骤。3、掌握量具的使用及测绘的方法，更好地 培养动手操作能力。 * * * * * * 弄清轴及轴上结构（键槽、轴肩等）所起的作用。测绘小轴一个（目测1:1比例，徒手画在坐标纸上） 要求：2-3人一组（一人测量，其他人记录） 1.采用一组图形（视图、剖视、断面及其他图样画法）完整、确切、清晰表达该零件。 2.完整、合理标注尺寸。 3. 查表确定零件的工艺结构尺寸（倒角、螺纹退刀槽、砂轮越程槽）。 4.正确给出标准结构键槽的尺寸，查表确定键槽深度 注意：粗、细线型分明 * 标注小轴尺寸(18个尺寸基本尺寸值) 轴类零件的尺寸标注：确定轴向主基准和辅助基准,依次标注尺寸,并避免尺寸链封闭基准——轴线 基准——轴肩端面 分轴段, 标注每个轴段的径向尺寸，标注轴向尺寸 标注每个轴段上的结构 Press ESC to quit Press ESC to quit Press ESC to quit Press ESC to quit Press ESC to quit Press ESC to quit Press ESC to quit Press ESC to quit Press ESC to quit Press ESC to quit Press ESC to quit Press ESC to quit Press ESC to quit Parts’ mapping Engineering Graphics Song HX, Engineering Graphics Department, DLUT What is parts’ mapping The technique of parts’ mapping is to produce a multi-views sketches first, then measuring all shape and location dimensions, finally determine technical requirements considering the existing part to form a standard detail drawing. Generally, the correct steps should be: making sketches before measuring → producing detail drawings for redesigning, repairing, or preparing accessories later. 1. The purpose of parts’ mapping 1) Understand the content, requirements and function of detail drawing. 2) Master the methods and steps of drawing sketches. 3) Master the skills to use the measuring tools properly, aim to improve practical ability furthermore. 2. The location of the measuring tools： Tools in the Drawe