《传输线电气参数测试方法研究与应用.》.pdf

40 8 Vol.40 No.8 2012 4 16 Power System Protection and Control Apr. 16, 2012 Research and application of testing method for electrical parameters of transmission lines XIE Zhi-yuan, WANG Yan, GUO Yi-he, LIU Qian (School of Electrical and Electronic Engineering, North China Electric Power University, Baoding 071003, China) Abstract : In order to analyze the attenuation characteristics of the PLC channel, it is necessary to establish a high frequency transmission line model, which needs to be verified by actual measured data. Based on the transmission line theory, the electrical parameters of a transmission line with certain length at different frequency are obtained through theoretical calculation. Compared with the test value of the practical model, the accuracy of theoretical calculation is verified. Besides, so as to simulate the practical power line network, a channel modeling method based on network cascading is proposed. In this method a length of uniform power line is regarded as one two-port networks and the whole power line can be represented by a cascading of multi two-port networks. Through the measurement of simulation model of practical line, the validity of the cascading thought is confirmed. The model provides a theoretical basis for the study of the electrical parameters in distribution network. Key words: electrical parameter attenuation the model of transmission lines two-port networks cascading TM71 A 1674-3415(2012)08-0151-05