8thfloor(Ergolight)vs.5-Ledalite.pptVIP

Adapting to people the environment System Overview Workspace specific Quality illumination Personal dimming control Occupancy sensors Daylight dimming Peak load management Scheduling/Reporting Workspace specific lighting One Ergolight per standard workstation Positioned directly over work area Puts light where it is needed Standard troffer layout: 26 fixtures Workspace specific layout: 13 fixtures Application Photo Quality Direct/Indirect Lighting Center lamp distributes light upwards, reflects off ceiling Provides uniform ambient light / Softens shadows Eliminates cave-like room appearance Outer lamps deliver extra light on desk-top for enhanced visibility Louvers control glare on computer screens Constant up-light in open spaces Personal Dimming Daylight Dimming Occupancy Sensing Up-light unaffected Occupancy and daylight sensing Overhead sensor location= reliable sensing Gradually dims outer lamps to 10% after time delay Holds at 10%, before turning lamps off Over 30% energy savings in window-adjacent locations Gradual dimming avoids sudden changes in levels Maintains constant light level at work plane Cubicle Illuminance Ceiling Height 8’x8’ 8’x10’ 10x10’ 8’ 48.5 fc 45.2 fc 35.5 fc 9’ 46.8 fc 44.0 fc 33.4 10’ 44.8 fc 42.3 fc 31.3 fc 11’ 42.3 fc 40.1 fc 29.2 fc 12’ 40.4 fc 38.4 fc 25.2 fc Workspace Dimensions Reflectances 80/50/20. Cubicle Walls 5’ @ 50% reflectance. T8 Lamps. LLF .9 Personal Dimming Control On-screen control panel Users select preferred light level Ceiling light stays constant System-wide management FM has full control over entire Ergolight network Entire network can be gradually dimmed for load shedding Events can be scheduled on daily/weekly/monthly basis Detailed energy reporting Load shedding and sensor commissioning Avoid peak demand charges with load shedding Commission sensors with the click of a mouse How it works: The Lighting Network Where the energy savings come from Energy Use 7 am Noon 7 pm Where the energy savi