BlueLEDwithPhosphor.pptVIP

Blue LED with Phosphor Illustration A blue GaInN/GaN LED and a phosphor wavelength converter suspended in a epoxy resin make a white Light LED. The thickness of the phosphor containing epoxy and the concentration of the phosphor determine the relative strengths of the two emission bands. 超高亮度半导体发光二极管(UHBLED)可定义为其光通量大于250流明,高亮度发光二极管(HBLED)可定义为其光通量大于50流明而小于250流明,一般的LED可定义为其光通量小于50流明;其光发射涉及粒子在多量子阱能级间的跃迁，电子和空穴的复合,爱因斯坦吸收、发射系数，内量子效率和外量子效率的计算，提高量子效率的折射率匹配方法,光频率转换和耦合的色图计算,和智能控制及实际应用。 Blue LED Why is GaN? Blue LED 不同环境下的照度 Efficacy Requirement US Department of Energys stiff future targets, which include the goal of 150?lm/W at 2?A by 2012. According to him, hitting this milestone will require a hike in internal efficiency to 90%. Evolution of LED Electrical World ,1907 19 309 1928 Philosophical Magazine 6 1024 1951 Physical Review 83 603 White-light LEDs by using a blue GaInN chip to pump a wavelength-converting phosphor. Materials The performance of UCSBs LEDs have rocketed, thanks to improvements in the quality of m-plane material. UCSBs latest LEDs have a wider multiple-quantum-well (MQW) region than conventional c-plane devices, which boosts their efficiency. Non-polar LEDs show less of a decline in efficiency at higher drive currents than their conventional cousins. To compare the performance of this design with that featuring cladding layers, we have produced three different broad-area layers with growth conditions similar to those used for c-plane LEDs. Removing the AlGaN cladding layers from the laser has cut the threshold-current density by a factor of three and reduced the emitters threshold voltage. Thermal management The luminous flux figures cited by LED manufacturers assume an LED junction temperature (Tj) of 25°C. LEDs are tested during manufacturing under conditions that differ from actual operation in a fixture or system. In general, luminous flux is measured under instantaneous operation