FeS反应器处理电镀废水试验研究.pdfVIP

Subject : Experimental Research on the Treatment of Electroplating Wastewater With FeS Reactor Specialty : Environmental engineering Name : Shangguan Zhonghua (Signature) Instructor : Wang Zheng (Signature) ABSTRACT In this paper, trying to find a flexible and easy, low cost, suitable for electroplating wastewater treatment for small and medium reactors and the corresponding process for the costs of our existing electroplating wastewater treatment are high, the low level of pollution control, as well as the FeS fluidized bed reactor our predecessors studied have some problems in the process. This paper mainly in three aspects: First, the traditional fixed bed reactor and the S-type fixed bed reactor as a test reactor to low-cost easy to get the FeS as the remover of mixed Chromium, copper, zinc, cadmium removal efficiency and the impact of factors were studied, and second, it was studied that the traditional fixed bed of mixed waste water treatment backwash cycle, solid-liquid separation process parameters; third compared the reactor from the removal, the actual operation and management aspects. Papers obtained through a large number of tests: ①traditional fixed bed reactor and the S-type fixed bed reactor have high removal efficiency to the Cr6+, Cu2+, Zn2+ , Cd2+ in mixed electroplating wastewater. The best combination of fixed-bed reaction conditions, namely: FeS fill height 40cm, water flow rate 1.6L/h, FeS particle size of 5-7mm; Cr6+, the average removal rate was 99.96%, Cu2+, the average removal rate of close to 100% , Zn2+ , the average removal rate was close to 100%, Cd2+, the av