金能钒电池图片2009年7月8日.docVIP

此相片於 2009年7月8日 在 Whitehall,?都柏林,?DUB,?愛爾蘭 使用 Canon EOS 30D 拍攝 Data Logging Circuitry for the battery The current is measured using a Hall Effect current sensor. The voltage is measured using a potential divider to create a ratio suitable for the 5V voltage range on the Freeduino board. Data Logging Circuitry for the battery The current is measured using a Hall Effect current sensor. The voltage is measured using a potential divider to create a ratio suitable for the 5V voltage range on the Freeduino board. Data Logging Circuitry for the battery The current is measured using a Hall Effect current sensor. The voltage is measured using a potential divider to create a ratio suitable for the 5V voltage range on the Freeduino board. Visit our website at: Relatively Simple Circuit to tie everything together This circuit supplies the 5V power supply for the Hall Effect and Temperature Chips. The Potential Divider is also connected to this circuit. All the measurement leads are then connected to the Analog inputs of the freeduino board. Freeduino board and other circuits The outputs from the external circuits can be seen connected to the freeduino board. SLR Camera in Time Lapse mode to monitor the change in color of the electrolytes during discharge As the electrolytes change to different oxidation levels, they change colour Charger, battery and monitoring system Ethernet Shield Removing trapped air from the system after adding the electrolytes Majed examining the solar collectors Removing trapped air from the system after adding the electrolytes Newly delivered Electrolyte Tanks Newly delivered Electrolyte Tanks Newly delivered Electrolyte Tanks The electrolyte solutions are classed as hazardous solutions and had to be packed extremely well. Flow Battery Housing and GEFC Flow Battery Housing and GEFC Flow Battery Cell Voltage and Current indicators The scale of these indicators is so large that they are absolutely no use what so ever. Current and Voltage are measured