毕业论文-自动剪切生产线的PLC控制系统设计-软件设计.doc

编号 淮安信息职业技术学院毕业论文 题 目 学生姓名 学 号 系 部 电气工程系 专 业 班 级 指导教师 顾问教师 二〇一年月Automatic shearing production line used for metal coil processing into a certain size of sheet metal, but at the same time the sheet metal stamping, effectively improve the machining precision and production efficiency of products, and enhance the automation of the production process, suitable for mass production, has the very broad application prospects. This topic design the PLC control system of automatic shearing production line, the main work is in: a, introduces the composition and working principle of automatic shearing production line. The whole production line consists of decoiler, feeder and press of three parts. Uncoiler driven by frequency converter. Feeder driven by servo motor; Punch in sheet metal stamping forming. Second, according to the production process flow, design the control system. Of PLC, frequency converter, servo driver/servo motor selection and touch-screen devices such as; Third, according to the production process requirement, design the control program, including touch screen and PLC program. Fourth, complete system overall debugging. System normal operation, the feed length set the touch screen, PLC pulse number according to the set value calculated, after send servo driver, servo motor control feeding, so as to realize precise servo positioning. Ensures that the feeding machine, high precision and high efficiency, precision reaches 1 m + / - 0.01 mm, fully meet the practical requirements. Key words：PLC；Servo Driver／Servo Motor；Frequency Converter；Touch Panel.目 录 摘 要 I Abstract II 第一章 绪论 1 1.1 课题研究背景 1 1.2 自动剪切生产线国内的现状 1 1.3 自动剪切生产线国外的现状 1 1.4 自动剪切生产线的发展前景 2 1.5 论文简介 2 第二章 自动剪切生产线的整体方案设计 3 2.1 自动剪切生产线的组成 3 2.1.1开卷机 4 2.1.2 送料机 4 2.1.3 冲床 4 2.1.4 码垛 5 2.2 自动剪切生产线的优点 5 第三章 自动剪切生产线的硬件设计 6 3.1 自动剪切生产线的硬件组成结构 6 3.2 自动剪切生产线的PLC的外部连接 7 3.2.1 PLC的型号选择 7 3.2.2 PLC的外部连接 8 3.3 变频器外部连接 8 3.3.1 变频器型号的选择 8 3.3.2 变