毕业设计某多层建筑桩基础设计.doc

《基础工程》课程设计 学 号： 112003111165 姓 名： 沈益方 专 业： 交通土建 系 别： 土木工程系 指导教师： 陈开圣教授 二○一四年六月摘 要 本次毕业设计的内容为某多层建筑桩基础设计，包括结构设计和施工设计两部分。设计主要对住宅桩基础工程的地基处理方案进行论证比较并对施工工艺及检测报告进行了详细的描述，对建设场地的境、工程地质条件及岩土工程条件做了必要的叙述。文中最为重要的部分是设计计算和施工部分。 结构设计本着“安全，适用，耐久”的原则，进行了确定地基持力层，确定承载力计算，承台计算，地基抗震验算，及基础配筋计算等基础结构的设计。 施工设计本着“功能适用，经济合理，环境相宜”的原则，以国家相应规范、标准为依据，完成了所要求的的相应施工设置。ABSTRACT The content of this graduation design is the design of pile foundation building, including the two part structure design and construction design. The building length 60.4m width 50.5m, the height is 3.0m, a total of 15 layers, using frame structure, reinforced concrete pile foundation. Design and construction technology and test report described in detail to demonstrate the foundation treatment plan of building pile foundation engineering, the construction site environment, engineering geological and geotechnical conditions made the necessary description. The most important part is the design calculation and construction. Structure design in safety, applicability, durability principle, carried out to determine the bearing layer of foundation, calculation of bearing capacity of pile foundation, calculation, seismic calculation, design and foundation reinforcement computing infrastructure. Design and construction of the spirit of function, reasonable economy, environmental good principle, corresponding to national norms, standards, completed the building foundation construction required the corresponding settings. Concrete piles and pile hammer sinking in compared compaction method, the construction noise and vibration is much smaller than the precast pile, can build large diameter of pile, and can be used in a variety of foundation. But the influence of construction quality on the bearing capacity of the pile of great. KEYWORDS：structural design;；construction organization design； reinforced concrete；Bored pile 目 录 摘 要 i ABSTRACT ii 目 录 iii 1 绪论 1 1.1选题意义 1 1.2国内外研究现状 2 2场地岩土工程条件 4