IC卡燃气表计费器外壳塑料模具设计方案.docVIP

摘 要 本课题来源于郑州优德模具集团公司。针对IC卡燃气表计费器壳体塑件，通过测绘并完成其三维造型设计，根据IC卡计费器壳体塑件的特点完成其注射模设计。 本文主要阐述了IC卡燃气表计费器壳体注塑成型的基本原理、注射模具的结构设计方法及过程，详细介绍了注塑模具的计算机辅助设计,包括对注塑模具的型腔,型芯,脱模机构的设计，并运用计算机系统辅助该模具设计的建立、修改、分析或优化的过程。采用Autodesk公司的软件AutoCAD和PTC公司的软件Pro/ENGINEER软件完成了对燃气表计费器壳体注塑模具的计算机辅助设计，共绘制注射模总装图一套，并绘制了11张关键零件图。 当今社会，随着燃气表计费器外壳在家庭当中的日益普及，对各种燃气表计费器的需求量也越来越大，因此研究这一套家用燃气表计费器壳体注射模具对于提高计费器壳体的生产质量和效率有着非常重要的作用。并且通过这次毕业设计，自己也得到了很大的锻炼。 关键词：IC卡燃气表计费器，计算机辅助设计，注射模具 Abstract The subject comes from Youde Zhengzhou Mold Co. Ltd. According to the plastic product of the IC card gas meter meter, 3D model is done through surveying and mapping it and the design for the injection mold has been completed. This article focuses on the IC card gas meter meter shell the basic principle of injection molding, injection mold design method and process, detailed computer-aided design of injection molds, including injection mold cavity, core, de Die body design and the use of computer systems supporting the establishment of the mold design, modification, analysis or optimization process. 采用Autodesk公司的软件AutoCAD和PTC公司的软件Pro/ENGINEER软件完成了对燃气表计费器壳体注塑模具的计算机辅助设计，共绘制注射模总装图一套，并绘制了11张关键零件图。 Autodesks software with PTCs software, AutoCAD and Pro / ENGINEER software completed a Shell gas meter billing computer-aided design of injection mold, injection mold assembly diagram of a draw, and draw the 11 key parts diagram. 当今社会，随着家用燃气表计费器外壳在家庭当中的日益普及，对各种燃气表计费器的需求量也越来越大，因此研究这一套家用燃气表计费器壳体注射模具对于提高计费器壳体的生产质量和效率有着非常重要的作用。Nowadays, with the domestic gas meter meter enclosure in the family among the growing popularity of various gas meter meter on demand is also growing, so the research that a domestic gas meter billing Shell Injection Shell mold for improving the charging efficiency of the production quality and has a very important role. 并且通过这次毕业设计，自己也得到了很大的锻炼。 Through the graduation project, she also received a lot of exercise. Keywords：IC card gas meter meter，computer-assisted design，injection mold 目录 引言 1 1 IC卡家用燃气计费器壳体结构工艺分析 3 1.1 原始设计依