毕业设计（论文）_复合纸塑薄膜自立袋卧式成型机毕业设计.docVIP

提供全套毕业论文图纸，欢迎咨询 摘 要 本次课题是针对复合纸塑薄膜自立袋卧式成型机的结构进行设计。该制袋机的包装速度70-90袋/min，三边封合。 自立袋是一种底部有水平支撑结构的软包装袋，自面市以来深受消费者的喜爱，其市场份额日益增多。本次设计研究的自立袋成型机选用卧式机型、间歇运动。其中，薄膜的供送装置采用膜预牵引机构，即预先将薄膜储存在储膜机构，然后再进入制袋区，这样便可保障薄膜在袋子成型过程中平稳、不跑偏，成型效果好；袋成型器选用三角板成型器，由等腰锐角三角形平板、导辊和固定支板联接而成。在多种机型上应用，尤其当制袋规格有较大变化时，其具有良好的适应性，利用三角板成型器即可将平张薄膜折叠成型；因为制袋机是间歇运动，所以横封、纵封装置采用热板式加压封合，切断装置选用冷刀切断；牵袋装置选用滚轮式牵引，靠一对滚轮的对滚，利用滚轮与包装材料之间的摩擦力进行料袋牵引。再结合锥齿轮、离合器和同步带的传动便可实现牵袋的间歇运动；本机采用机械式无级调速装置，通过旋钮的顺逆转动带动可动锥盘上下移动，即可实现速度的增减，达到无级调速的目的。其结构简单，传动平稳，噪声小，使用维修方便，效率高，所以在各类机械中应用广泛；而传动系统将电动机提供的动力经无级调速和蜗轮蜗杆减速器减速后传至主轴，然后分配给各部件，使各部件相互协调运动。 本次研究设计的袋成型机，对于生产效率的提高、薄膜材料的节约和产品质量的提升有很重要的意义。 关键词:包装机；自立袋；结构设计；间歇运动 Abstract The issue is about complex paper and plastic film for stand-up pouches structure horizontal molding machine design. The packing speed of the bag making machine is 70-90 bags / min, trilateral sealing. Stand-up pouches have bottom horizontal support structure to make the work more flexible, since the products gone into the market, the market share keep growing.The design study of self-selection of horizontal bag forming machine models, intermittent exercise. Among them, the film feeding device uses membrane pre-traction mechanism, namely the pre-stored in the reservoir will film membrane organization, and then into the bag area, so that the bag can protect the film forming process smooth, without deviation, forming effective.Selection of bags forming triangle forming, coupled by the isosceles acute triangle plate, guide rollers and fixed support plate is made.Applications in a variety of models, especially when there is a large bag specification changes, it has good adaptability, use triangle shaper can be folded flat sheet film forming; Because the bag machine is intermittent movement, so the cross sealing , longitudinal sealing device uses pressurized hot plate sealing, cold-knife cut off the device selection; pull bag device selection wheel traction, by a pair of rollers on roll, between the roller and the friction force packaging m