《Cabinet1》.pdfVIP

An American National Standard Designation: D 1748 – 02 (Reapproved 2008) Designation: 366/84 Standard Test Method for Rust Protection by Metal Preservatives in the Humidity Cabinet1 This standard is issued under the fixed designation D 1748; the number immediately following the designation indicates the year of original adoption or, in the case of revision, the year of last revision. A number in parentheses indicates the year of last reapproval. A superscript epsilon (´) indicates an editorial change since the last revision or reapproval. This standard has been approved for use by agencies of the Department of Defense. 1. Scope QQ-S-698 Steel Sheet and Strip, Low Carbon 1.1 This test method covers the evaluation of the rust- 2.3 Military Standards:4 preventive properties of metal preservatives under conditions MIL-C-5646F Cloth, Airplane of high humidity. MIL-C-15074E Corrosive Preventive Compound Finger 1.2 The values stated in SI units are to be regarded as the Print Remover standard except where the test apparatus or consumable parts 2.4 Society of Automotive Engineers:5 are only available in other units. In such cases these will be SAE 1009C Tee Reducer, Bulkhead on Side, Flareless Tube regarded as standard. The values given in parentheses are for 3. Summary of Test Method information only. 1.3 This standard does not purport to address all of the 3.1 Steel panel