《Detector (BOD) Driver》.pdfVIP

SMART ARM-based Microcontrollers AT03789: SAM D10/D11/D20/D21/DA1/R Brown Out Detector (BOD) Driver APPLICATION NOTE Introduction ® ® This driver for Atmel | SMART ARM -based microcontrollers provides an interface for the configuration and management of the devices Brown Out Detector (BOD) modules, to detect and respond to under-voltage events and take an appropriate action. The following peripheral is used by this module: • SYSCTRL (System Control) The following devices can use this module: • Atmel | SMART SAM D20/D21 • Atmel | SMART SAM R21 • Atmel | SMART SAM D10/D11 • Atmel | SMART SAM DA1 The outline of this documentation is as follows: • Prerequisites • Module Overview • Special Considerations • Extra Information • Examples • API Overview Atmel-42149E-SAM-Brown-Out-Detector-(BOD)-Driver_AT03789_Application Note-12/2015 Table of Contents Introduction1 1. Software License 3 2. Prerequisites4 3. Module Overview5 4. Special Considerations6 5. Extra Information 7 6. Examples8 7. API Overview9 7.1. Structure Definitions 9 7.1.1. Struct bod_config9 7.2. Function Definitions9 7.2.1. Configuration and Initialization9 7.3. Enumeration Definitions 12 7.3.1. Enum bod 12 7.3.2. Enum bod_action12 7.3.3. Enum bod_mode 12 7.3.4. Enum bod_prescale12 8. Extra Information for BOD Driver14 8.1. Acronyms14 8.2. Dependencies14 8.3. Errata14 8.4. Module History14 9. Examples for BOD Driver 15 9.1. Quick Start Guide