中间包非正常液面条件下钢液流动的模拟研究.pdfVIP

中间包非正常液面条件下钢液流动的模拟研究 靳星， 陈登福， 龙木军， 胡锐 (重庆大学材料科学与工程学院，重庆，400030) 摘要：通过水力学模拟研究了某方坯五流中间包非正常液面条件下的钢液流动状态，在不同控流装置条 件下模拟中间包各液面条件下流动状态的变化规律，分析了中间包内液面卷渣的原因，根据模拟实验结果 确定了不同拉速条件下的中间包内极限卷渣液面高度和非正常浇铸情况下铸机正常运行的可等待时间。数 值模拟和物理模拟结果一致，表明模拟实验结果能够为实际生产提供理论指导。 关键词：中间包；非正常液面条件；卷渣；物理模拟；数值模拟 onSteelFluidFlow Study SimulationforTundishin Non--normalLevel LiquidCondition J玳Xing，CHENDeng—fu，LONG Rui Mu-jun，HU ofMaterialsScienceand (College Engineering，Chongqing Abstract：Onthebasicsteel of flowsimulationforafive—strandbilletcastertundishinnon-normallevel liquid conditionawamr lawoffluidflowfortundishwithvariousflowcontroldevicesinseveral by model，thechange levelconditionswas thecauseof was liquid obtained，and limited of slagentrapmentanalyzed．Theliquidheights fortundishatvarious andthe timeforthecaster in slagentrapment castingspeed waiting runningproperly non-normalconditionwereobtained．In resultsofthe simulationofsteelflowfor casting addition，the physical in tundishnon-normallevelconditionwerein withthenumericalsimulation．The liquid goodagreement resultsshowthatthesimulationresultsCan theoreticalforthe comparison provide guidancepracticalproduction． level words：tundish；non—normal simulation Key liquidcondition；slagentrapment；physicalsimulation；numerical 1前言