FRP约束高强混凝土轴心抗压强度的计算方法.pdf

Journal of Southeast University (English Edition) Vol. 20 No. 3 Sept . 2004 ISSN 1003 Calculation on uniaxial compressive strength of high strength concrete after wrapped by FRP 1 1 1 2 2 Oian Chunxiang Chen Shixin Zheng Xiaoxia Guo Zhangi Piet Stroeven (1 Department of Materials Science and Engineering, Southeast University, Nanj ing 2 10096, China) (2 Faculty of Civil Engineering and Geoscience, Delft University of Technology, Delft,, NNeetthheerrllaannddss)) ,, NNeetthheerrllaannddss)) Abstract: A theoretical calculation method of the axial compressive strength of a high strength concrete With fibre reinforced plastics (FRP) constraint is proposed. It is shoWn by test verification that the FRP strength devotion factor used for this method is in accord With actual conditions. FRP is not up to the ultimate strength When the concrete reaches the ultimate strength , Whose strength devotion factor is in the range of 0 .28 to 0 . 59 , Which is related to an elastic modulus. The method can be used to estimate axial compressive strength of the concrete strengthened With FRP. The theoretical strength is 10 to 30 higher than the measured one.