Ansys培训5WB_DS01 随机振动与分析.pptVIP

Workshop – 前处理-接触 The assembly to be shell meshed consists of multiple surface bodies separated by small offsets that account for the physical spacing between the neutral (axis) planes of each piece of steel. We need to use “Bonded” Contact in order to simulate the effect of welded and/or bolted assembly connectivity. Click on ConnectionsCreate Automatic Contact The Default definition is “Bonded” 6 Workshop – 前处理-网格尺寸 The assembly consists of multiple slender bodies plus a large flat Roof plate. We want to specify a relatively fine mesh size on the slender members but a larger element up top. By assigning larger elements on the large roof, we preserve CPU time and are able to use finer (usually more accurate) elements elsewhere. Change to Body Select. On the Outline Tree, RMB on the Mesh object InsertSizing (for slender bodies) In Details, Replace “Default” size with 2 (inches) RMB in Graphics Window, Select All But then hold CTRL and LMB single select on the “roof body” to unselect that part from this Size object. Apply InsertSizing (for the large “roof” body) Enter “4” for size in Details (for the large top plate). Use Single Select and LMB on the large Body. Apply Preview the mesh, MeshGenerate Mesh If desired, repeat the steps above to increase or decrease element sizes as desired to enhance the model or reduce CPU time. Larger Elements on roof 7 8,9 10 Training Manual Workbench-Simulation Dynamics ANSYS, Inc. Proprietary Training Manual DYNAMICS 11.0 ANSYS, Inc. Proprietary Training Manual ANSYS, Inc. Proprietary Training Manual DYNAMICS 11.0 ANSYS, Inc. Proprietary 欢迎进入 ANSYS技培训第五天 随机振动(PSD) 分析 主要内容 定义和目的 Workbench随机振动分析功能 分析流程 随机振动分析定义和目的 什么是随机振动分析 基于概率的谱分析. 典型应用如火箭发射时结构承受的载荷谱，每次发射的谱不同，但统计规律相同. Reference: Random vibrations in mechanical systems by Crandall Mark 和确定性谱分析不同，随机振动不能用瞬态动力学分析代替. 应用基于概率的功率谱密度分析，分析载荷作用过程中的统计规律 Image from “Random Vibrations Theory and Practice” by Wirsching, Paez and Ortiz. 随机振动分析定义和目的 什么