以通量线法为初值的直流线路离子流场计算优化.pdfVIP

39 卷 6 期 电 网 技 术 Vol. 39 No. 6 20 15 年6 月 Power System Technology Jun. 2015 文章编号：1000-3673 （20 15）06-1546-05 中图分类号：TM 835 文献标志码：A 学科代码：470 4034 以通量线法为初值的直流线路离子流场计算优化 莫江华，张波，尹晗 （清华大学 电机工程与应用电子技术系，北京市 海淀区 100084 ） Optimization of Ion Flow Field Calculation for HVDC Transmission Line by Using Calculation Results of Flux Tracing Method as Initial Charge Densities for Finite Element Method MO Jianghua, ZHANG Bo, YIN Han (Department of Electrical Engineering, Tsinghua University, Haidian District, Beijing 100084, China) ABSTRACT: The electromagnetic environment of power 高。使用该方法，计算了输电线路周围的等势线分布，明确 transmission corridor is one of the key problems to be 了传统通量线法在计算空间电场时由于Deutsch 假设所引 considered in the design and construction of HVDC 的误差。 transmission proj ects. The space charge caused by conductor 关键词：离子流场；合成电场；Deutsch 假设；有限元法； corona forms ion flow field and the methods to solve the ion 空间电荷 flow field are mainly the flux tracing method (FTM) and the DOI 10.13335/j.1000-3673.pst.2015.06.012 finite element method (FEM), although the calculation speed of the former is high but its calculation results in the space is not 0 引言 satisfied, and the calculation results by the latter are of high 高压直流线路在我国实际输电工程中得到了 accuracy but the calculation efficiency is dissatisfied. The 广泛应用，其电晕损失、无线电干扰和地面合成电 authors combine the superiorities of both methods that is, the 场及离子流密度等因素需要在设计和建设中加以 calculation result by FTM is used as the initial charge densities