基于实际工程的直流输电控制系统仿真模型.pdfVIP

第 37 卷 第 3 期 电 网 技 术 Vol. 37 No. 3 2013 年 3 月 Power System Technology Mar. 2013 文章编号：1000-3673 （2013 ）03-0629-06 中图分类号：TM 721 文献标志码：A 学科代码：470·4051 基于实际工程的直流输电控制系统仿真模型 万磊，丁辉，刘文焯 （中国电力科学研究院，北京市海淀区 100192 ） Simulation Model of Control System for HVDC Power Transmission Based on Actual Project WAN Lei, DING Hui, LIU Wenzhuo (China Electric Power Research Institute, Haidian District, Beijing 100192, China) ABSTRACT: After the analysis on present situation of 机制，以预防换相失败。针对实际直流控制器的分层计算方 simulation model of control system for HVDC power 式，提出了采用统一步长计算的补偿措施。仿真结果与若 transmission, a simulation model for DC control system based 干直流工程系统现场调试的录波曲线进行了对比，分析提 on the controller of actual HVDC transmission project is 前触发对模型仿真结果的影响，验证了模型的准确性。 proposed, and the basic structure, control characteristics of the 关键词：直流输电；控制系统；主控；极控；触发控制；电 proposed model and the main simplification of actual controller 流控制；等相位间隔 are presented. The proposed model contains three major proportions, namely the master control, the pole control and 0 引言 the firing control. The principle and implementation of each 控制系统是直流输电系统的大脑，极大影响着 control module such as mian control, current control, extinction angle control, firing control and so on are analyzed. 直流输电系统的运行性能[1-2] 。控制系统模型对直流 The firing control based on evenly spacing in phase, which is 输电的仿真计算具有决定性作用。 adopted by actual HVDC transmission project, is 在目前应用较广泛的仿真软件中，无论是采用 implemented in the firing control and the advanced firing