平面变压器中并联绕组的设计.pdfVIP

25 卷 14 期 中 国 电 机 工 程 学 报 Vol.25 No.14 Jul. 2005 2005 年7 月 Proceedings of the CSEE 2005 Chin.Soc.for Elec.Eng. 文章编号：0258-8013 （2005 ）14-0146-05 中图分类号：TM433 文献标识码：A 学科分类号：470·40 平面变压器中并联绕组的均流设计 旷建军，阮新波，任小永 （南京航空航天大学航空电源重点实验室，江苏省南京市 210016 ） CONSIDERATION FOR CURRENT SHARING AMONG PARALLEL WINDINGS IN PLANAR TRANSFORMERS KUANG Jian-jun, RUAN Xin-bo, REN Xiao-yong （Nanjing University of Aeronautics and Astronautics, Nanjing 210016, Jiangsu Province, China ） ABSTRACT: In order to enhance the current handling 器绕组设计相关的技术做了大量的研究工作，特别 capacity of the windings, it is a very common practice to use 是美国CPES（Center for Power Electronics Systems ） parallel windings in low voltage and high current DC/DC [6- 11] 做了大量开创性的工作 。在文献[6] 中作者通过 converters. Because of high-frequency effects (namely skin 对平面变压器绕组的有限 分析证明了边缘效应 effect and proximity effect), the current flowing through those 使绕组损耗增加，找到了使绕组交流电阻减小的绕 windings may be not equally divided among them, resulting in 组之间的最佳距离，并指出当绕组原副边宽度相等 high ac resistance. Based on symmetrical structure of winding 并布置在磁芯窗口中心时，可大大减少边缘效应的 arrangement and voltage balance in parallel windings, a way for winding arrangement is derived, which makes current share 影响。在文献[7-8]中作者通过有限 分析，指出在 in the windings with even number of layers. Finite Element 绕组的布置上利用原副边绕组交叉换位技术( 即将 Analysis (FEA) and test prove its correction and effectiveness. 原副边的绕组交错布置)