交流接触器三维动态过程数值计算和分析.pdfVIP

第34 卷 第18 期 中 国 电 机 工 程 学 报 Vol.34 No.18 Jun. 25, 2014 2014 年6 月25 日 Proceedings of the CSEE ©2014 Chin.Soc.for Elec.Eng. 2967 DOI ：10.13334/j.0258-8013.pcsee.2014.18.013 文章编号：0258-8013 (2014) 18-2967-09 中图分类号：TM 571 交流接触器三维动态过程数值计算与分析 林抒毅，许志红 (福州大学电气工程与自动化学院，福建省 福州市 350116) Simulations and Numerical Analysis on 3D Dynamic Process of Alternating Current Contactors LIN Shuyi, XU Zhihong (College of Electrical Engineering and Automation, Fuzhou University, Fuzhou 350116, Fujian Province, China) ABSTRACT: In order to improve the overall performance 程。通过仿真模型分析触头一次弹跳、二次弹跳以及铁心弹 indicators, a 3D dynamic simulation model of alternating 跳的影响因素，分析了合闸相角、电压、铁心弹簧、触头弹 current (AC) contactors which includes contact and 簧等参数对触头、铁心吸合弹跳的影响，为进一步研究交流 electromagnetic systems were built. At the meantime, the 接触器吸合弹跳抑制措施提供理论依据。 constitutive equations, motion equations and boundary 关键词：交流接触器；动态模型；吸合过程；三维全仿真； constraints were introduced into the control equations for the ANSYS/LS-DYNA consideration of influences caused by the friction in motion and the deformation during the bounce. And then, the 3D motion 0 引言 mathematical model was verified through the experiment. The 交流接触器作为量大面广的低压控制电器，其 focus is on the bounce of its contact and core. The result shows 可靠性和各项性能指标直接影响整个系统的运行 that the 3D model reflects the actual bounce of the contact and 情况。随着科学技术不断发展，自动化水平不断提 core