基于黑箱理论和传统等效电路的无源元件建模方法.pdfVIP

第30 卷 第6 期 中 国 电 机 工 程 学 报 Vol.30 No.6 Feb.25, 2010 112 2010 年2 月25 日 Proceedings of the CSEE ©2010 Chin.Soc.for Elec.Eng. 文章编号：0258-8013 (2010) 06-0112-05 中图分类号：TM 15 文献标志码：A 学科分类号：470·40 基于黑箱理论与传统等效电路的 无源元件建模方法 孙海峰，崔翔，齐磊 (华北电力大学电气与电子工程学院，北京市 昌平区 102206) Modeling Method Based on Black-box Theory and Traditional Equivalent Circuit for Passive Elements SUN Hai-feng, CUI Xiang, QI Lei (School of Electrical and Electronic Engineering, North China Electric Power University, Changping District, Beijing 102206, China) ABSTRACT: With the application of semiconductor switch in 元件的宽频建模。 power systems, wideband modeling of related devices is 关键词：等效电路；黑箱理论；无源元件；阻抗综合 necessary to analyze the electromagnetic interference. This paper presents an efficient method to model the passive devices 0 引言 with traditional equivalent circuit combined with black-box 半导体开关型器件被广泛应用于高压直流输 theory. Black-box impedance was obtained by the subtraction 电及柔性交流输电系统[1-3] 。研究表明，所有的电 operation between the measured and the traditional model. 力电子设备均会产生不同程度的频带较宽的电磁 Vector fitting was used to approximate this impedance and circuit synthesis theory was applied to provide equivalent 骚扰，该电磁骚扰可能会对其它设备和系统形成干 circuits. Based on these, wideband models of water-cooled 扰[2]，所以，电力电子中的电磁兼容问题已经受到 [1-6] resistor, anode reactor and capacitor were presented. The 越来越广泛的关注 。如何建立电力电子相关无