智能交流接触器自校正控制技术.pdfVIP

第35 卷 第6 期 中 国 电 机 工 程 学 报 Vol.35 No.6 Mar.20, 2015 1516 2015 年3 月20 日 Proceedings of the CSEE ©2015 Chin.Soc.for Elec.Eng. DOI ：10.13334/j.0258-8013.pcsee.2015.06.028 文章编号：0258-8013 (2015) 06-1516-08 中图分类号：TM 572 智能交流接触器自校正控制技术 汤龙飞，许志红 (福州大学电气工程与自动化学院，福建省 福州市 350116) The Control Technology of Self-correction for Intelligent AC Contactors TANG Longfei, XU Zhihong (School of Electrical Engineering, Fuzhou University, Fuzhou 350116, Fujian Province, China) ABSTRACT: This paper applied the voltage control mode and 关键词：智能交流接触器；电压控制模式；自校正；电流扫描 the transformed buck circuit into the intelligent control of the 0 引言 ac contactor and realized closed-loop control. On this basis, a self-correction control scheme with the state capture circuit of 交流接触器是一种应用广泛的低压控制电器， main contacts has been proposed. This paper analyzed the 随着工业生产现代化水平的提高，对其寿命和可靠 principle of the self-correction control and realized it by current 性的要求越来越高[1] 。近年来，接触器智能化技术 scanning. The control scheme can reduce the bounces of the ac contactor in making process with the offline self-correction. 发展迅速，出现了大量的研究成果。文献[2-4]提出 Through memory the offline self-correction parameters, the 了接触器高压直流起动，低压直流保持的开环控制 control module can recurrence the making coil current 方案，采用分段激励的方式对接触器工作过程进行 accurately. This control scheme relies less on the structure parameters of the ac contactor and is not sensitive to the input 动态控制。文献[5-7]提出了带电压或电流反馈的接 voltage fluctuation. The intelligent ac contactor can adjust the 触器脉宽调制控制方案，并对其动态工作过程进行 attractive force automa