变频器与plc在水控制系统中的应用英文+汉语翻译概述.doc

Transducer and PLC in the water control system applications Introduction Currently, the water level control in a large part of the electrical pumps are not towing gear shift system, no gear shift most of the electrical energy consumed in the water supply to the frequent changes in the pumps stopped. This not only makes the electrical work in inefficient zones, cut short the useful life of electrical and electrical equipment for the frequent failure to stop the high rate, leading to serious waste of water resources, system maintenance, repairs larger workload. With high living water and industrial water gradually increased, the traditional control methods are outdated. Originally used for artificial water level control, water level due to the lack of accurate positioning hour monitoring, it is difficult to accurately control the pumps have stopped; Using buoys or mechanical control devices such as water supply situation has made some changes, but because of mechanical failure more devices, poor reliability to maintenance will face great trouble. Frequency conversion technology, with its superiority in the area of energy efficiency and constant pressure control system can be solved by the existence of the above problems. Consider selecting single-chip or Plc and transducer combination at the core of the system can achieve a better control results. But in software design, Plc programming of more than single-chip concise, and visual; From the hardware interface considerations, single-chip circuit slightly complex; From the economic considerations, the Plc processes are mature, cost and small Plc single-chip a little, because the system parameters to be adjusted in accordance with the situation on the ground, Plc software, the time parameters adjustments simpler, so more conducive to after-sale personnel. Programmable Logic Controllers (PLCs) are a special type of computers that are used in industrial and safety critical applications. The purpose of a PLC is to control a