基于截面组合法和截面弹簧刚度考虑跨内塑性铰的钢框架高等分析.pdfVIP

31 卷 2 期 Vol.31 No.2 工 程 力 学 2014 年 2 月 Feb. 20 14 ENGINEERING MECHANICS 203 文章编号：1000-4750(2014)02-0203-07 基于截面组合法和截面弹簧刚度考虑跨内 塑性铰的钢框架高等分析 1 1,2 1,2 胡淑军 ，王 湛 ，潘建荣 (1. 华南理工大学土木工程系，广东，广州 510640；2. 华南理工大学亚热带建筑科学国家重点实验室，广东，广州 510640) 摘 要：采用截面组合法推导工字形或H 形截面的屈服方程，并在端部和跨内分别假想有一个零长度的弹簧考虑 截面的刚度，提出了有分布荷载作用的杆件仅使用一个单元就能准确模拟跨内塑性铰的钢框架高等分析方法。通 过对引入的非节点自由度进行凝聚，使得所提出的单元与常规单元具有相同的节点自由度。该方法还利用稳定函 数考虑单元的剪切变形和几何非 性、初始屈服方程中考虑残余应力、折减弹性模量法考虑初始缺陷。算例结果 表明，采用所提出的方法可得到高效率和高精度的结果。 关键词：钢框架；跨内塑性铰；截面组合法；截面弹簧刚度；分布荷载 中图分类号：TU973 文献标志码：A doi: 10.6052/j.issn.1000-4750.2012.11.0853 ADVANCED ANALYSIS OF STEEL FRAMES USING ELEMENT WITH INTERNAL PLASTIC HINGE BASED ON SECTION ASSEMBLAGE CONCEPT AND SECTION SPRING STIFFNESS HU Shu-jun1 , WANG Zhan1,2 , PAN Jian-rong1,2 (1. Department of Civil Engineering, South China University of Technology, Guangzhou, Guangdong 510640, China; 2. State Key Laboratory of Subtropical Building Science, South China University of Technology, Guangzhou, Guangdong 510640, China) Abstract: The yield function of an I or H section is derived by using the section assemblage concept, and an advanced analysis method of steel frames is proposed by assuming a spring with zero-length at the end and inner part of an element to consider the cross-sectional stiffness. It is demonstrated that the plastic hinge at the inner part of the element can be well predicted, based on the proposed method, by only using one element for the members subjected to distributed loads. The proposed element has the same nodal degree of freedom as a conventional element by condensing t