压电材料中孔边径向裂纹的动应力强度因子.pdfVIP

第 27 卷第 9 期 Vol.27 No.9 工 程 力 学 2010 年 9 月 Sep. 2010 ENGINEERING MECHANICS 7 文章编号：1000-4750(2010)09-0007-05 压电材料中孔边径向裂纹的动应力强度因子 * 宋天舒， 李 冬，牛士强 (哈尔滨工程大学航天与建筑工程学院，黑龙江，哈尔滨 150001) 摘 要：采用 Green 函数法研究含圆孔边界径向有限长度裂纹的无限压电材料对 SH 波的散射和裂纹尖端动应力 强度因子问题。首先构造出具有半圆型凹陷半无限压电介质的弹性位移 Green 函数和电场 Green 函数，然后采用 裂纹“切割”方法构造孔边裂纹，并根据契合思想和界面上的连接条件建立起求解问题的定解积分方程组。得到 孔边动应力强度因子的解析表达式。最后作为算例，给出了裂纹尖端动应力强度因子的计算结果图并进行了讨论。 部分计算结果与相应的弹性材料进行了比较。 关键词：压电材料；孔边裂纹；Green 函数；SH 波散射；动应力强度因子(DSIF) ；积分方程 中图分类号：O346.1 文献标识码：A DYNAMIC STRESS INTENSITY FACTOR FOR RADIAL CTACKS AT THE EDGE OF A CIECULAR CAVITY IN A PIEZOELECTRIC MEDIUM * SONG Tian-shu , LI Dong , NIU Shi-qiang (College of Aerospace and Civil Engineering, Harbin Engineering University, Harbin, Heilongjiang 150001, China) Abstract: Based on the method of Green’s function, the problem of SH-wave scattering by a circular cavity with any finite lengths radial cracks and the dynamic stress intensity factor at the crack tip in a piezoelectric material are investigated in the paper. Firstly, the displacement Green’s function and the electric potential Green’s function suitable for the present problem are constructed. Secondly, the infinite piezoelectric material is divided into two semi media. Based on the crack-division technique, the above two semi media can be conjuncted to a whole infinite medium. Thirdly, integral equations for the unknown stresses solution can be established, which are related to crack-tip dynamic stress intensity factor. The analytical expression on dynamic stress intensity factor is also