考虑开孔钢板厚度的PBL剪力键力学性能研究.pdfVIP

29 卷 8 期 Vol.29 No.8 工 程 力 学 2012 年 8 月 Aug. 20 12 ENGINEERING MECHANICS 282 文章编号：1000-4750(2012)08-0282-07 考虑开孔钢板厚度的 剪力键力学性能研究 肖 林，强士中，李小珍，卫 星 (西南交通大学土木工程学院，成都 610031) 摘 要：钢-混凝土组合结构中PBL 剪力键的力学性能受到多种参数的影响。为了解开孔钢板厚度对PBL 剪力键 力学性能的影响，进行了6 组24 个PBL 键试件的推出试验，研究PBL 键的静力性能及影响因素；从荷载-滑移 曲线出发对PBL 键的传力机理进行分析；研究PBL 键的破坏机理和开孔钢板厚度对破坏模式的影响。试验研究 结果表明：开孔钢板的厚度对PBL 键的设计承载力、抗剪刚度和极限承载力都有显著影响；荷载较小时PBL 键 的承载能力由混凝土榫抗剪提供，混凝土榫抗剪失效后转由贯穿钢筋抗剪承载；受开孔钢板厚度的影响，PBL 键 的破坏形式有贯穿钢筋的弯剪破坏、剪切破坏或开孔钢板的剪切破坏。结合国内典型推出试验的结果，推导了考 虑开孔钢板厚度的PBL 键承载力计算公式，公式与试验结果吻合良好。 关键词：钢-混凝土组合结构；PBL 剪力键；推出试验；静力性能；传力机理；破坏机理；承载力计算公式 中图分类号：TU398 文献标志码：A doi: 10.6052/j.issn.1000-4750.2011.06.0343 RESEARCH ON MECHANICAL PERFORMANCE OF PBL SHEAR CONNECTORS CONSIDERING THE PERFORATED PLATE S THICKNESS XIAO Lin , QIANG Shi-zhong , LI Xiao-zhen , WEI Xing (School of Civil Engineering, Southwest Jiaotong University, Chengdu 610031, China) Abstract: The mechanical properties of PBL shear connectors used in steel-concrete composite structures are influenced by various parameters. Push-out tests of 24 specimens in 6 groups are conducted to investigate the influence of perforated plate s thickness on the mechanical properties of PBL shear connectors. Based on the load-slip curve, the load transfer mechanism and the failure mechanism of PBL shear connectors are analyzed. The impact of perforate plate s thickness on failure mode was studied. The following conclusions are obtained from the research. The design bearing capacity, shear stiffness and ultimate bearing capacity are significantly influenced