CP-01 RT射线检测工艺.docVIP

Radiographic Examination Procedure 射线检测工艺规程 1 REV. NO. 修订号Prepared By 编 制Date 日 期Reviewed By 审 核Date 日 期Approved By 批 准Date 日 期Scope 范围 This procedure defines the X-ray radiographic examination technique and acceptance condition in accordance with the requirements of the ASME Code Sect. Sect. VIII Div.1, ASME B31.1 and ASME Code Sect. V. 本规程适用于按照ASME规范第卷、卷第分册ASMEB31.1和ASME第V卷最新版本相一致的要求进行的X射线检测。 This procedure shall be supplemented by the examination instruction which defines the variable more specific for the job to be examined. 本规程应由具体详细的检测工艺文件的做补充。 Qualification of NDE Personnel 检测人员资格 Any NDE personnel concerning with this examination shall be qualified as radiographic examiner in accordance with Written Practice for Qualification and Certification of Nondestructive Examination (NDE) Personnel（JSSN/CX-10）, which conforms to the requirements of SNT-TC-1A (2006) . 从事射线检测的人员必须按本公司《无损检测人员培训考评及认证实施细则》进行资格评定和认证，此实施细则符合SNT-TC-1A（2006）的要求。 Equipment, Tools and Materials 检测设备、器材 he equipment, tools and materials shall be in compliance with the following condition and the requirements of the examination instruction. 所选用的设备、器材应能保证符合下列条件和RT工艺卡的要求。 Radiation Source 射线源 One of the following equipment listed in Table 1 shall be used. The effective source size shall be verified and be within the specified limitation. 应选用表1中列出的设备之一，应当核对有效焦点尺寸，确认在规定范围内。 Table 1 X-Ray Equipment表1 X-射线设备 Manufacturer 制造厂 Brand 型号 Max. Voltage 最大管电压KV Tube Current 管电流(mA) Source Size 焦点尺寸mm DANDONG 丹东XXH-3005Z 300KV 5mＡ ×3.0 DANDONG NDE Eqipment Factory丹东XXQ-2505D 250KV 5mＡ ×2.0 Films 胶片 The film listed in Table 2 shall be used: 应选用表2中列出的胶片。 Table 2 Films 表2 胶片 Brand类型 Manufacturer制造厂家 Designation标号 FU MINGWEI SHENZHEN CO., LTD. 富明威深圳有限公司 Intensifying Screens增感屏 The following thickness of lead foil intensifying screens shall be used: 铅箔增感屏的厚度应在表3中选择： Table 3 Intensifying Screens 表3 增感屏 Work Voltage of X-Ray 管电压 Thickness of Screen 铅箔厚度(mm) Fr