广南中学教学综合楼设计大学本科毕业（设计）论文计算书.docVIP

南昌广南中学教学综合楼设计 the design of ?office-and-teaching building complex of ?Guang Nang middle school in nanchang 总计 毕业设计（论文） 49 页 表 格 12 个 插 图 11 幅摘要 本计算书是针对南昌工程学院土木工程专业2011级毕业设计——南昌广南中学教学综合楼设计的书面成果。本教学楼为五层现浇钢筋混凝土框架结构，长72m，宽17.4m，层高3.3m。 整个设计分为建筑设计和结构设计两部分。建筑设计根据现行规范和毕业设计任务书的要求对教学楼进行了合理的平面布置。由于本建筑不属于高层建筑，故在结构设计中不考虑风荷载和地震荷载。首先选择一榀框架为本次手算的对象，明确计算简图和各个计算参数，计算竖向荷载、水平荷载，进而计算出各种荷载作用下的内力，然后对各种内力进行组合，从中挑选出一组或多组最不利内力组合进行截面配筋计算。最后完成了梁柱配筋、板配筋、基础配筋等各构件施工图的绘制。 在结构设计部分，下载excel计算表格进行力矩分配的电算，将电算结果同手算结果进行对比、分析，以保证计算成果的可靠性。 关键词:教学楼、框架结构、抗震设计、excel  Abstract The calculations for Nanchang Institute of Civil Engineering Specialty 2011 class Graduation - The written results of Nanchang Guangnan middle school complex building design. The school building is five-situ reinforced concrete frame structure, length 72m, width 17.4m, story 3.3m. The whole design is divided into two parts, architectural design and structural design. Architectural design according to existing norms and graduation requirements of the design task book teaching building for a reasonable layout. Since this building does not belong to the high-rise buildings, it is not considering wind load and earthquake load in structural design. I select a frame as the object of count, clearly diagrams and calculate various calculation parameters, calculate vertical load, horizontal load, then calculate the internal force under various loads. And calculate the various internal force, pick out the most unfavorable combination of one or more sets of internal forces from a section reinforcement. Finally completed the beams reinforcement, plate reinforcement and foundation reinforcement components such as working drawing. In the structural design section, I download excel spreadsheet to calculate the torque distribution, the results were compared with the results of the hand count, analyzed to ensure the reliability of the results of the calculation. Keywords: teaching bui