电吹风外壳建模与数控加工.docVIP

摘要 本文对UG的三维曲面造型和数控加工模块进行了初步的介绍。主要通过利用UG这款软件来实现对吹风机的三维曲面造型和数控加工。首先根据吹风机的曲面特点，运用了扫掠、曲线网格曲面、拉伸还有曲面偏置等方法对吹风机进行了三维曲面造型。然后利用UG数控加工模块，对吹风机模型进行了整体的加工，其中加工的过程大致分为型腔铣、轮廓铣铣削、表面铣削和多刀路清根铣等这几个部分，确认走刀路线之后，对吹风机模型的加工进行了模拟加工仿真，最后利用UG的自动编程功能根据吹风机模型的走刀路线进行后处理，导出G代码程序。 关键字：吹风机造型；UG；加工 Abstract In this paper, three-dimensional surface modeling UG and CNC machining modules were introduced preliminary. Mainly through the use of this software to achieve the three UG surface modeling of a hairdryer and CNC machining. Firstly, according to the surface characteristics of a hairdryer, using a sweep, curve mesh surface, the surface tension as well as other methods of hair dryers bias carried out a three-dimensional surface modeling. Then use UG CNC machining module, hair dryer model the overall process, the process in which the process is roughly divided into several parts of the cavity milling, contour milling milling, surface milling and multi-gouging milling toolpaths confirm feed path after that, the processing of a hair dryer model simulated machining simulation, and finally use the automatic programming function according to UG feed path hairdryer treatment after the model derived G-code program. Keywords: hair dryers modeling; UG; processing 目录 第章 绪论 1.1 UG的介绍………………………………………………………………… 1 1.2 UG的产品特点…………………………………………………………… 1 第二章 吹风机的造型设计 …………………………………………………………3 2.1 电吹风模型的参考造型和总体参考尺寸…………………………………3 2.2 创建回转圆弧………………………………………………………………4 2.3 创建圆形凸台………………………………………………………………4 2.4 生成把手……………………………………………………………………5 2.5 创建吹风道…………………………………………………………………5 2.6 创建壳体……………………………………………………………………6 2.7 建立通风槽口草图…………………………………………………………6 2.8 创建槽口 2.9 倒边角………………………………………………………………………7 第三章 吹风机外壳凸模的加工…………………………………………………… 9 3.1 项目初始化…………………………………………………………………9 3.2 创建刀具………………………………………………………………… 9 3.3 创建几何体……………………………………………………………… 10 3.4 创建操作………………………………………………………………… 10 3.5 自动编程3 参考文献 ……………………………………………………………………………16 致 谢…………………………………………………………………………………17课程设计总结 ………………………………………………………………………18  第一章 绪论 1.1 UG的介绍 UG（Unigra