根文件系统的移植.doc

根文件系统的移植1．下载busybox-1.13..tar.bz2 网址：/ 2．解压busybox-1.13.4.tar.bz2到桌面 [root@localhost Desktop]# tar -xjvf busybox-1.13.4.tar.bz2 -C ./ [root@localhost Desktop]# cd busybox-1.13.4 [root@localhost busybox-1.13.4]# 3．编辑Makefile文件 [root@localhost busybox-1.13.4]# gedit Makefile 将 CROSS_COMPILE ?= 改为CROSS_COMPILE ?=/usr/local/arm/3.4.1/bin/arm-linux- 将 ARCH ?= $(SUBARCH) 改为 ARCH ?= arm进行默认配置 [root@localhost busybox-1.13.4]# make defconfig //恢复默认配置 对配置信息进行修改 [root@localhost busybox-1.13.4]# make menuconfig HOSTLD scripts/kconfig/mconf HOSTCC scripts/kconfig/lxdialog/checklist.o HOSTCC scripts/kconfig/lxdialog/inputbox.o HOSTCC scripts/kconfig/lxdialog/lxdialog.o HOSTCC scripts/kconfig/lxdialog/menubox.o HOSTCC scripts/kconfig/lxdialog/msgbox.o HOSTCC scripts/kconfig/lxdialog/textbox.o HOSTCC scripts/kconfig/lxdialog/util.o HOSTCC scripts/kconfig/lxdialog/yesno.o HOSTLD scripts/kconfig/lxdialog/lxdialog scripts/kconfig/mconf Config.in 在弹出的TUI界面中进行如下配置： 检查Miscellaneous Utilities--- taskset 是否去除 同时设置如下： Busybox Settings --- Build Options --- [*]Build BusyBox as a static binry (no shared libs) //选用静态连接 [*]Build with Large File Support (for accessing files 2 GB) (/usr/local/arm/3.4.1/bin/arm-linux-) Cross Compiler prefix Installation Options --- [*] Dont use /usr (./_install) BusyBox installation prefix //安装路径 Busybox Library Tuning --- (6) Minimum password length (2) MD5: Trade Bytes for Speed [*] Faster /proc scanning code (+100 bytes) [ ] Support for /etc/networks [*] Command line editing (1024) Maximum length of input [*] vi-style line editing commands (15) History size [*] History saving [*] Tab completion [*] Username completion [*] Fancy shell prompts //Setting this option allows for p