嵌入式网络接口(以太网适配器)的研究与设计11160104资料.docVIP

湖南文理学院芙蓉学院 课程名称： 嵌入式课程设计 学生姓名： 学 号： 专业班级： 通信工程2011级 指导教师： 王南兰 完成时间： 2014年5月24日 报告成绩： 嵌入式以太网适配器的研究与设计 网络适配器是将计算机、工作站、服务器等设备连接到网络上的通信接口装置。结合目前以太网技术在嵌入式领域中的应用，本文提出了基于32位单片机PIC32的嵌入式以太网适配器。该适配器采用Microchip公司生产的ENC624J600以太网控制器作为以太网硬件接口，设计了基于UDP的通信协议来实现可靠的以太网通信。 经试验测试结果表明该嵌入式以太网适配器在稳定性、实时性、速率方面都有良好的表现，特别适用于现有的网络传输系统，在数据采集、数据传输等领域均有广泛的应用前景。 关键词：网络适配器，TCP/IP协议，PIC32单片机 The Design of an Embedded Ethernet Adaptor Abstract: With the popularization of Internet and the rapid development of Ethernet, Ethernet based control equipment more and more, developing more and more quickly. At present, Ethernet has been widely applied to various computer network, via Ethernet and TCP/IP protocol stack can make different network control equipment to achieve interconnection, data exchange. In order to solve the problem of network communication of embedded device, convenient for embedded system and computer network communication, need to design a kind of embedded network adapter. A network adapter is a computer, workstation, server device connected to a network communications interface device. Combined with the current Ethernet technology in embedded applications, based on32 single-chip computer PIC32embedded Ethernet adapter. The adapter is produced by Microchip company ENC624J600 Ethernet controller for Ethernet hardware interface, based on the design of the UDP communication protocol to achieve reliable Ethernet communication. Test results show that the embedded Ethernet adapter on the stability, real-time, rate has good performance, particularly applicable to the existing network transmission system, the data collection, data transmission and other fields have broad application prospects. Key words: Network adapter， The TCP/IP protocol，PIC32 microcontroller 目 录 一、 绪论 ...................................................