带转向交通灯PLC设计解决方案.docVIP

《电气控制》课程设计说明书 交通灯设计 院 、 部：电气与信息工程学院 学生姓名：指导教师： 职称 专 业：班 级：完成时间： 2013年月日 摘 要 随着社会经济的发展，城市交通问题越来越引起人们的关注。人，车，路三者关系的协调，已成为交通管理部门需要解决的重要问题之一。城市交通控制系统是用于城市交通数据监测，交通信号灯控制与交通疏导的计算机综合管理系统，它是现代城市交通监控指挥中最重要的组成部分。随着交通灯的建立，晚上车子少时，它也按白天模式进行运行，让许多车主浪费了很多宝贵时间，所以通过该设计得以解决这一问题。 该设计通过可编程控制器对交通灯的控制，可以达到两种模式独立运行的交通灯状态，该设计以可编程控制器为主，加上适当的定时器对时间方面的控制便可达到预期的目标，既能对人车路的关系进行协调，又能解决夜间红灯浪费时间的问题。 针对该设计需要解决的问题，该设计采用了步进指令使用GX Developer程序对应解决的问题编写对应的梯形图，最后利用三菱可控制编程器进行调试，最终实现了对交通灯的自动控制。 关键词：ABSTRACT With the development of society and economy, city traffic problems caused by more and more peoples attention. People, vehicles, road coordination relationship between the three, has become one of the important problems of traffic management departments to solve the. City traffic control system for city traffic data monitoring, traffic signal control and traffic management computer system, it is the most important part of the modern city traffic monitoring and command. With the establishment of traffic lights, the night the car less, it is daytime mode of operation, so many owners to waste a lot of valuable time, so to solve this problem through the design. The design of the programmable controller for the control of traffic lights, can achieve the two traffic light state model of independent operation, the design of the programmable controller, the control with appropriate timer to time can reach the expected goal, can carry out the harmonious relationship of people vehicle road, and can solve red light at night time wasting problem. According to this design needs to solve the problem, this design uses a step-by-step instruction using the GX Developer program corresponding to solve the problem of ladder diagram corresponding, the Mitsubishi can control programmer debugging, finally realizes the automatic control of traffic lights. Keywords：traffic lights; PLC; ladder diagram 目 录 1 概述……………………………………………………………………………………1 1.1 交通灯的发展及应用…………………………………………………………1 1.2