原创力文档- 1、原创力文档（book118）网站文档一经付费（服务费），不意味着购买了该文档的版权，仅供个人/单位学习、研究之用，不得用于商业用途，未经授权，严禁复制、发行、汇编、翻译或者网络传播等，侵权必究。。
- 2、本站所有内容均由合作方或网友上传，本站不对文档的完整性、权威性及其观点立场正确性做任何保证或承诺！文档内容仅供研究参考，付费前请自行鉴别。如您付费，意味着您自己接受本站规则且自行承担风险，本站不退款、不进行额外附加服务；查看《如何避免下载的几个坑》。如果您已付费下载过本站文档，您可以点击 这里二次下载。
- 3、如文档侵犯商业秘密、侵犯著作权、侵犯人身权等，请点击“版权申诉”（推荐），也可以打举报电话：400-050-0827(电话支持时间：9:00-18:30)。
- 4、该文档为VIP文档，如果想要下载，成为VIP会员后，下载免费。
- 5、成为VIP后，下载本文档将扣除1次下载权益。下载后，不支持退款、换文档。如有疑问请联系我们。
- 6、成为VIP后，您将拥有八大权益，权益包括：VIP文档下载权益、阅读免打扰、文档格式转换、高级专利检索、专属身份标志、高级客服、多端互通、版权登记。
- 7、VIP文档为合作方或网友上传，每下载1次， 网站将根据用户上传文档的质量评分、类型等，对文档贡献者给予高额补贴、流量扶持。如果你也想贡献VIP文档。上传文档
查看更多
5.3 Appearance Quality
The appearance quality of the sunlight-controlled coated glass sheet should meet the technical requirements of?vehicle grade in GB 11614.
The tempered and semi-tempered sunlight-controlled coated glass sheet used as curtain wall should have fine edge processing.
The appearance quality of the sunlight-controlled coated glass sheet should meet the requirements of Chart 1.
Chart 1 The Appearance Quality of the Sunlight-Controlled Coated glass Sheet
Defect Description Superior Product Conforming Product Pinhole Diameter0.8mm Intensive not allowed 0.8mm≦Diameter1.2mm Middle:3.0*S,pcs,Distance between each pinhole bigger than 300mm. 75mm edge;Intensive not allowed Intensive not allowed 1.2≦Diameter1.6mm Middle:not allowed
75mm edge:3.0*S,pcs Middle:3.0*S,pcs
75mm edge:8.0*S,pcs 1.6mm≦Diameter≦2.5mm not allowed Middle:2.0*S,pcs
75mm edge:5.0*S,pcs Diameter2.5mm not allowed not allowed Spot 1.0mm≦Diameter≦2.5mm Middle:not allowed
75mm edge:2.0*S,pcs Middle:5.0*S,pcs
75mm edge:6.0*S,pcs 2.5Diameter≦5.0mm not allowed Middle:1.0*S,pcs
75mm edge:4.0*S,pcs Diameter5.0mm not allowed not allowed Streak Visible not allowed not allowed Dark Stripe Visible not allowed not allowed Coating Scratch 0.1≦Width≦0.3mm
length≦60mm not allowed Unlimited
Distance between scratches smaller than 100mm Width0.3mm
length60mm not allowed not allowed Glass Scratch Width≦0.5mm
Length≦60mm 3.0*S,pcs Width0.5mm
Length60mm not allowed not allowed PS:1.Intensive pinholes refer to over 20 pcs within 100mm area.
S refers to area of glass plane?in?square metres.
Allowed pcs equal to each factor multiply S, and get a integer according to GB/T 8170.
Middle of glass plane is in the area of 75mm away from the edge, other parts called edge. 5.4 Optical?Performance
Optical?Performance including Ultraviolet Transmittance, visible light transmittance, visible light reflection rate, ?Solar direct transmittance and ?solar energy total transm
文档评论（0）