笔记本电脑造型设计要点.doc

 摘要 时至今日，我国的电脑产品趋于成熟，而笔记本的销售量占据了大部分江山，笔记本已经成为了工作生活必备的电脑类型。如今，笔记本电脑走入中低端市场，它的配置已经不是大众首先要关心的地方，雷同的外表已经不能满足大众的要求，需要我们的设计师们拿出更多更新颖的造型。 文本首先对笔记本电脑外部材质做比较，从外观、价格等方面做出分析，以及色彩的比较、搭配等，对未来笔记本造型设计趋势的预测。然后是完整介绍一个基于Solidworks的笔记本电脑外观建模过程。首先构建上盖的主要部件即摄像头以及上盖板等，笔记本的造型设计主要集中在上盖外壳以及下半机身的设计上。然后构建上盖与下机身的衔接结构，这样方便上下机身的结合，最后在按照这个从上至下的顺序对计算机下半机身进行建模，其中包括计算机的键盘槽，各种指示灯的布局以及各种计算机接口和DVD光驱的外部设计等。在对笔记本散热器外观的设计完成后，就转入对机身四周按钮的设计，首先就是我们最常用到的键盘部分。键盘的每个按键都要特别的来设计，比如说不同的尺寸不同的定位方式等等，当然为了保证设计的真实合理性，在设计时必须将按键上的字母符号都如实的呈现出来。最后也就是一个装配过程，将机身上盖板与机身下半部分结合起来成为一个整体。 最后对与本次设计做一个全面的总结，为以后的设计奠定扎实基础。 关键词：笔记本电脑；造型设计；Solidworks。 Abstract Today, Chinas computer products mature, while notebook sales accounted for most of the country, the notebook has become an essential type of computer in work life. Today, notebook computer into a low-end market, its configuration is not the public should first concern, the same appearance has been unable to meet the requirements of the public, and requires our designers to come up with more innovative styling. The text first notebook computer external material, from the appearance, price and other aspects make the analysis, and color compared with the forecast on the future of notebook design trends. Then there is a complete introduction to an appearance of UG-based notebook computer modeling process. First build the superstructure of the main components of the camera and on the cover, the design of the notebook is mainly concentrated in the design of the cover shell and the second half of the fuselage. And then build the superstructure and the convergence of the lower fuselage structure, the combination of the upper and lower body, so easy, Finally, in accordance with this order from top to bottom half body of the computer modeling, including the computers keyboard groove, a variety of instructions the layout of lights and a variety of computer interface and DVD drives, external design. Completed on the design of the notebook cooler appearance, it is transferred to the de